SDD450 Datasheet, PDF (1/6 Pages) Solid State Optronic – DC Input Photo-Darlington Optocoupler

SDD450
DC Input
Photo-Darlington Optocoupler
DESCRIPTION
The SDD450 consists of a Photo Darlington transistor optically coupled to a light emitting diode. Optical coupling between the input LED
and output Photo Darlington allows for high isolation levels while maintaining low-level DC signal control capability. The SDD450 provides
an optically isolated method of controlling many interface applications such as telecommunications, industrial control and instrumentation
circuitry.
FEATURES
• ^{High current transfer ratio (CTR:MIN 600%)}
• ^{High input-to-output isolation voltage (3,750 Vrms)}
• ^{Ultra-miniature 4 pin SOP package}
• ^{High Load Voltage (Vceo = 300V MIN)}
OPTIONS/SUFFIXES*
• ^{-TR Tape and Reel}
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
1
4
1. Anode
2. Cathode
3. Emitter
2
3
4. Collector
APPLICATIONS
• ^{Home Appliances}
• ^{Office Automation Equipment}
• ^{Telecom / Datacom}
• ^{Power Supplies}
• ^{Fax / Modems}
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -40
125
Operating Temperature
°C -40
100
Continuous Input Current mA
50
Transient Input Current
A
1
Reverse Input Control
V
6
Voltage
Output Power Dissipation mW
170
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• ^{UL / C-UL Approved, File #E201932}
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 6
SDD450
rev 1.40 (10/25/2004)