SAT800_15 Datasheet, PDF (1/10 Pages) Solid State Optronic – Small 8 pin DIP/SMD package

SAT800
AC Input
60V
Dual Photo-Transistor Optocoupler
Description
The SAT800 consists of two phototransistors, each
optically coupled to two light emitting diodes for AC input
operation. Optical coupling between the input IR LED and
output phototransistor allows for high isolation levels while
maintaining low-level DC signal control capability. The
SAT800 provides an optically isolated method of controlling
many interface applications such as telecommunications,
industrial control and instrumentation circuitry.
The SAT800 comes standard in a miniature 8 pin DIP
package.
Applications
 Registers, Copiers, Automatic Vending Machines
 System Appliances, Measuring Instruments
 Computer Terminals, PLCs
 Telecommunication Equipment, Telephones
 Home Appliances
 Digital Logic Inputs
 Microprocessor Inputs
 Switching Power Supplies
Schematic Diagram
(+/-) Input 1
8 Collector
(-/+) Input 2
7 Emitter
Features
 V_CEO = 60V
 Small 8 pin DIP/SMD package
 Low input power consumption
 High stability
 CTR Range 20 – 300%
 High Isolation Voltage (5000V_RMS)
 Long Life / High Reliability
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature ………………………-40 to +100°C
Continuous Input Current ………………………………..50mA
Transient Input Current ………………….……………..500mA
Reverse Input Control Voltage …………..…………………6V
Input Power Dissipation¹ ………………………………40mW
Total Power Dissipation¹ ……………………………..300mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
NOTES
1.
Power Dissipation per Channel
(+/-) Input 3
(-/+) Input 4
SAT800
6 Collector
5 Emitter
Ordering Information
Part Number
Description
SAT800
SAT800-H
SAT800-S
SAT800-STR
8 pin DIP, (50/Tube)
0.40” (10.16mm) Lead Spacing (VDE0884)
8 pin SMD, (50/Tube)
8 pin SMD, Tape and Reel (1000/Reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
© 2012 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 10
SAT800/H/S/TR
Rev 2.00 (11/02/2012)
001532