SAT400_15 Datasheet, PDF (1/10 Pages) Solid State Optronic – Small 4 pin DIP/SMD package

SAT400
AC Input
60V
Photo-Transistor Optocoupler
Description
The SAT400 consists of a phototransistor optically coupled
to two light emitting diodes. Optical coupling between the
two input IR LEDs and output phototransistor allows for
high isolation levels while maintaining low-level AC signal
control capability. The SAT400 provides an optically
isolated method of controlling many interface applications
such as telecommunications, industrial control and
instrumentation circuitry.
The SAT400 comes standard in a miniature 4 pin DIP
package.
Applications
 Registers, Copiers, Automatic Vending Machines
 System Appliances, Measuring Instruments
 Computer Terminals, PLCs
 Telecommunication Equipment, Telephones
 Home Appliances
 Digital Logic Inputs
 Microprocessor Inputs
 Switching Power Supplies
Schematic Diagram
Features
 V_CEO = 60V
 Small 4 pin DIP/SMD package
 Low input power consumption
 High stability
 High Isolation Voltage (5000V_RMS)
 Long Life / High Reliability
 VDE/EN60747-5-2 Approval
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature ………………………-40 to +100°C
Continuous Input Current ………………………………..50mA
Transient Input Current ………………….……………..500mA
Reverse Input Control Voltage …………..…………………6V
Input Power Dissipation…………………………………40mW
Total Power Dissipation ……………………………..200mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
© 2013 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Ordering Information
Part Number
Description
SAT400
SAT400-H
SAT400-S
SAT400-STR
4 pin DIP, (100/Tube)
0.40” (10.16mm) Lead Spacing (VDE0884)
4 pin SMD, (100/Tube)
4 pin SMD, Tape and Reel (1000/Reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
Page 1 of 10
SAT400/H/S/TR
Rev 2.00 (01/30/2013)
001552