SAT1670 Datasheet, PDF (1/8 Pages) Solid State Optronic – High stability

SAT1670
AC Input
80V
Quad Photo-Transistor Optocoupler
Description
The SAT1670 consists of four phototransistors, each
optically coupled to two light emitting diodes. Optical
coupling between the input IR LEDs and output
phototransistor allows for high isolation levels while
maintaining low-level AC or DC signal control capability.
The SAT1670 provides an optically isolated method of
controlling many interface applications such as
telecommunications, industrial control and instrumentation
circuitry.
The SAT1670 comes standard in an ultra-miniature 16 pin
SSOP package.
Applications
 Office Automation Equipment
 System Appliances, Measuring Instruments
 Computer Terminals, PLCs
 Telecom / Datacom
 Home Appliances
 Digital Logic Inputs
 Fax / Modems
 Power Supplies
Schematic Diagram
(+/-) Input 1
(-/+) Input 2
(+/-) Input 3
(-/+) Input 4
(+/-) Input 5
(-/+) Input 6
(+/-) Input 7
(-/+) Input 8
SAT1670
16 Collector
15 Emitter
14 Collector
13 Emitter
12 Collector
11 Emitter
10 Collector
9 Emitter
Features
 Ultra miniature 16 pin SSOP package
 Low input power consumption
 High stability
 CTR Range 20 – 400%
 High Isolation Voltage (3750V_RMS)
 Long Life / High Reliability
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature ………………………-40 to +100°C
Continuous Input Current ………………………………..50mA
Transient Input Current ………………….……………..500mA
Reverse Input Control Voltage …………..…………………6V
Input Power Dissipation ……………..…………………40mW
Total Power Dissipation ………………….…………..600mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
Ordering Information
Part Number Description
SAT1670
SAT1670-TR
16 pin SSOP
16 pin SSOP, Tape and Reel (2000/Reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
© 2012 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 8
SAT1670 /TR
Rev 2.00 (11/29/2012)
001537