SAT1600_15 Datasheet, PDF (1/9 Pages) Solid State Optronic – 16 pin DIP/SMD package

SAT1600
AC Input
60V
Quad Pole Optocoupler
Description
The SAT1600 consists of four phototransistors optically
coupled to individual light emitting diodes. Optical coupling
between two input IR LEDs and a single output
phototransistor allows for high isolation levels while
maintaining low-level AC signal control capability. The
SAT1600 provides an optically isolated method of
controlling many interface applications such as
telecommunications, industrial control and instrumentation
circuitry.
The SAT1600 comes standard in a 16 pin DIP package.
Applications
 Registers, Copiers, Automatic Vending Machines
 System Appliances, Measuring Instruments
 Computer Terminals, PLCs
 Telecommunication Equipment, Telephones
 Home Appliances
 Digital Logic Inputs
 Microprocessor Inputs
 Switching Power Supplies
Schematic Diagram
+ Input ₁
- Input ₂
16 ^Collector
15 ^Emitter
+ Input ₃
- Input ₄
+ Input ₅
- Input ₆
+ Input ₇
- Input ₈
14 ^Collector
13 ^Emitter
12 ^Collector
11 ^Emitter
10 ^Collector
SAT1600
9 ^Emitter
Features
 V_CEO = 70V
 16 pin DIP/SMD package
 Low input power consumption
 High stability
 CTR Range 20 – 300%
 High Isolation Voltage (5000V_RMS)
 Long Life / High Reliability
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature ………………………-40 to +100°C
Continuous Input Current ………………………………..50mA
Transient Input Current ………………….……………..500mA
Reverse Input Control Voltage …………..…………………5V
Input Power Dissipation ………………………………40mW¹
Total Power Dissipation ……………………………..200mW¹
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
1 _{Per Channel}
Ordering Information
Part Number
SAT1600
SAT1600-H
SAT1600-S
Description
16 pin DIP, (25/Tube)
0.40” (10.16mm) Lead Spacing (VDE0884)
16 pin SMD, (25/Tube)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
© 2013 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 9
SAT1600 /H/S
Rev 2.00 (11/25/2013)
001775