|
S842 Datasheet, PDF (1/4 Pages) Solid State Optronic – 1 Form A Solid State Relay | |||
|
S842
1 Form A
Solid State Relay
DESCRIPTION
The S842 is a bi-directional, single-pole, single-throw, normally open multipurpose relay. The circuit is composed of one LED on the input
side which activates an optically coupled IC on the output - controlling the firing angle of two back-to-back SCRs. This circuit assures no
false triggering under most adverse conditions, and a tight zero-volt window not exceeding 5V.
FEATURES
⢠Inverse parallel SCR output
⢠High transient immunity
⢠700V blocking voltage
⢠1.2A maximum continuous current
⢠Low input control current
⢠High input-to-output isolation
⢠Solid state reliability
⢠Zero-volt switching
OPTIONS/SUFFIXES
⢠-H High Output Isolation
⢠-S Surface Mount Option
⢠-TR Tape and Reel
SCHEMATIC DIAGRAM
APPLICATIONS
⢠Programmable controls
⢠Valve control
⢠Solenoids
⢠Remote switching
⢠Home appliances
⢠Metering equipment
⢠Heating elements
⢠Gas pump control circuitry
MAXIMUM RATINGS
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
85
Continuous Input Current mA
40
Transient Input Current
mA
400
Reverse Input Control
Voltage
V
6
Output Power Dissipation W
1.2
APPROVALS
⢠BABT CERTIFICATE #607837:
BS EN 60950, BS EN 41003, BS EN 60065
⢠UL FILE #E90096
rev 2.0 (9/24/04)
Solid State Optronics
1.888.377.4776
www.ssousa.com
|
▷ |