S111-X_15 Datasheet, PDF (1/8 Pages) Solid State Optronic – Zero-Volt Cross Switching

S111-X
Zero Cross
600V / 0.8A
AC Solid State Relay
Description
The S111-X is a bi-directional, single-pole, single-throw,
normally open multipurpose solid-state relay. The circuit is
composed of one input IR LED with a series limiting
resistor which activates an optically coupled IC on the
output that controls the firing angle of two back-to-back
SCRs. This circuit assures no false triggering under most
adverse conditions, and a tight zero-volt switching window
not exceeding 5V. The S111-X provides high peak load
voltage (600V+) and high input-to-output isolation voltage
(up to 5kV_RMS).
The S111-X comes in a compact 8 pin DIP package,
making it ideal for high-density board applications.
Applications
 Valve Control
 Solenoid Control
 Home Appliances
 Metering Equipment
 Heating Elements
 Gas Pump Control Circuitry
Schematic Diagram
Do Not Connect 1
8 +/- Load
(+) Input 2
RIN
(-) Input 3
Zero
Cross
Do Not Connect 4
S111-X
5 -/+Load
Features
 Zero-Volt Cross Switching
 Input Series Limiting Resistor (300Ω TYP)
 High Blocking Voltage (600V MIN)
 High Transient Immunity
 0.8A Maximum Continuous Current
 Low Input Control Current
 Long Life / High Reliability
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL:
VDE:
File # E90096
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature ………………………-40 to +85°C
Continuous Input Current ………………………………..50mA
Transient Input Current ………………….……………..500mA
Reverse Input Control Voltage …………..…………………5V
Input Power Dissipation ………..………………………40mW
Total Power Dissipation …………..…………………800mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
Ordering Information
Part Number
Description
S111-X
S111-XH
S111-XS
S111-XHS
S111-XSTR
S111-XHSTR
8 pin DIP, (50/Tube)
5kV_RMS V_ISO, 8 pin DIP, (50/Tube)
8 pin SMD, (50/Tube)
5kV_RMS, 8 pin SMD, (50/Tube)
8 pin SMD, Tape and Reel (1000/Reel)
5kV_RMS, 8 pin SMD, Tape and Reel (1000/Reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
© 2015 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 8
S111-X /H/S/TR
Rev 2.00 (02/27/2015)
002406