S107_15 Datasheet, PDF (1/5 Pages) Solid State Optronic – High transient immunity

S107
1 Form A
Solid State Relay
DESCRIPTION
The S107 is a bi-directional, single-pole, single-throw, normally open multipurpose relay. The circuit is composed of one LED on the input
side which activates an optically coupled IC on the output - controlling the firing angle of two back-to-back SCRs. This circuit assures no
false triggering under most adverse conditions, and a tight zero-volt window not exceeding 5V.
FEATURES
• ^{Zero-Volt Cross Switching}
• ^{High transient immunity}
• ^{600V blocking voltage}
• ^{0.8A maximum continuous current}
• ^{High input-to-output isolation}
• ^{Solid state reliability}
OPTIONS/SUFFIXES*
• ^{-S Surface Mount Leadform Option}
• ^{-TR Tape and Reel Option (1,000 pcs / reel)}
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
APPLICATIONS
• ^{Valve control}
• ^Solenoids
• ^{Home appliances}
• ^{Metering equipment}
• ^{Heating elements}
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
85
Continuous Input Current mA
40
Transient Input Current
mA
400
Reverse Input Control
Voltage
V
6
Output Power Dissipation mW
500
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• ^{UL / C-UL Approved, File #E90096}
• ^{BABT Approved #608203}
© 2007 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
S107
rev 1.41 (10/23/2007)