M281 Datasheet, PDF (1/5 Pages) Solid State Optronic – Solid State Relay

M281
1 Form A
Solid State Relay
DESCRIPTION
The M281 is a bi-directional, single-pole, single-throw, normally open solid-state relay in a miniature 4-pin small outline package. This
device offers very low on-resistance--allowing for a high load current rating in a miniature package, ideal in higher power applications
where board space is limited.
FEATURES
• ^{Low On-Resistance (0.5 ohms MAX)}
• ^{1A Continuous Load Current}
• ^{60V load voltage rating}
• ^{Low input control current (3mA TYP)}
• ^{Miniature 4 pin SOP package}
• ^{High input-to-output isolation (1.5kV MIN)}
OPTIONS/SUFFIXES*
• ^{-TR Tape & Reel Option (2,000 pcs / reel)}
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
APPLICATIONS
• ^{Automated Test Equipment}
• ^{Meter reading systems}
• ^{Medical equipment}
• ^{Battery Monitoring}
• ^Multiplexers
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
85
Continuous Forward
mA
50
Current
Peak Forward Current
A
1
(1us)
Reverse Input Control
V
5
Voltage
Output Power Dissipation mW
400
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• ^{UL / C-UL Approved (File # E201932)}
© 2009 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
M281
rev 1.41 (04/03/2009)