M250 Datasheet, PDF (1/4 Pages) Solid State Optronic – 1 Form A Solid State Relay

M250
1 Form A
Solid State Relay
DESCRIPTION
The M250 is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay in a 4-pin miniature small outline
package. It is designed to replace electromechanical and reed relays in special applications that call for very fast switching rates. The relay
consists of an integrated circuit that drives two special source-to-source enhancement type DMOS transistors with extremely low output
capacitance and leakage current. The IC is optically coupled to a light emitting diode which controls its switching. The design of the circuit
makes it ideal for switching high frequency signals.
FEATURES
• ^{High input-to-output isolation}
• ^{Low input control power consumption}
• ^{35mA maximum continuous load current}
• ^{300 ohms maximum on-resistance}
• ^{Long life/high reliability}
• ^{Fast switching speeds}
• ^{Low output capacitance}
• ^{Ultra miniature 4-pin small outline package}
APPLICATIONS
• ^{Telecom switching}
• ^{Tip/Ring control}
• ^{PCMCIA modules}
• ^Multiplexers
• ^{Meter reading systems}
• ^{Data acquisition}
• ^{Medical equipment}
• ^{Battery monitoring}
• ^{Home/Safety security systems}
OPTIONS/SUFFIXES
MAXIMUM RATINGS
• ^{-TR Tape and Reel}
SCHEMATIC DIAGRAM
1
+ Input
4
Load
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
85
Continuous Input Current mA
40
2
- Input
IC
3
Load
Transient Input Current
mA
400
Reverse Input Control
Voltage
V
6
Output Power Dissipation mW
400
APPROVALS
• ^{BABT CERTIFICATE #650192:}
BS EN 60950, BS EN 41003, BS EN 60065
rev 1.0
Solid State Optronics, Inc.
1.888.377.4776
www.ssousa.com