M222_15 Datasheet, PDF (1/5 Pages) Solid State Optronic – Ultra miniature 4-pin small outline package

M222
1 Form B
Solid State Relay
DESCRIPTION
The M222 is a bi-directional, single-pole, single-throw, normally closed multipurpose solid-state relay in a miniature 4-pin small outline
package. It is designed to replace electromechanical relays in general purpose switching applications. The relay consists of an integrated
circuit that drives two rugged source-to-source depletion type DMOS transistors - optically coupled to a light emitting diode. The output
MOS transistors are protected with free-wheeling diodes that can handle up to 1.5A of inrush current, making the relay ideal for switching
lamps and highly inductive loads.
FEATURES
APPLICATIONS
• ^{Ultra miniature 4-pin small outline package}
• ^{Low input control power consumption (2.5mA TYP)}
• ^{120mA maximum continuous load current}
• ^{25 ohms maximum on-resistance}
• ^{High input-to-output isolation}
• ^{Long life/high reliability}
• ^Multiplexers
• ^{Meter reading systems}
• ^{Data Acquisition}
• ^{Medical equipment}
• ^{Battery monitoring}
• ^{Home/Safety security systems}
OPTIONS/SUFFIXES*
ABSOLUTE MAXIMUM RATINGS*
• ^{-TR Tape and Reel}
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
85
Continuous Forward
mA
50
Current
Peak Forward Current
A
1
(1us)
Reverse Input Control
V
5
Voltage
Output Power Dissipation mW
400
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• ^{UL File#E201932}
© 2006 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
M222
rev 1.41 (4/6/2006)