M212_15 Datasheet, PDF (1/7 Pages) Solid State Optronic – High Input-to-Output Isolation (1.5kV MIN)

M212
1 Form B
400V / 35Ω
MOSFET Output Solid State Relay
Description
The M212 is a bi-directional, single-pole, single-throw,
normally closed multipurpose solid-state relay in a
miniature 4-pin small outline package. It is designed to
replace electromechanical relays in general purpose
switching applications. The relay consists of an integrated
circuit that drives two rugged source-to-source depletion
type DMOS transistors - optically coupled to a light emitting
diode. The output MOS transistors are protected with free-
wheeling diodes that can handle up to 1.5A of inrush
current, making the relay ideal for switching lamps and
highly inductive loads.
The M212 comes standard in a 4 pin SOP package.
Applications
 Medical Equipment
 Security Systems
 Meter Reading Equipment
 Data Acquisition
 Battery Monitoring
 Multiplexers
Schematic Diagram
(+) Input 1
4 (+/-) Load
Features
 High Input-to-Output Isolation (1.5kV MIN)
 Low Input Control Current (1.5mA TYP)
 120mA Maximum Continuous Load Current
 Low On Resistance (35 MAX)
 Ultra Miniature 4SOP Package
 Long Life / High Reliability
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature …………………………-40 to +85°C
Continuous Input Current ………………………………..50mA
Transient Input Current ………………….……………..500mA
Reverse Input Control Voltage …………..…………………5V
Input Power Dissipation…………………………………40mW
Total Power Dissipation ……………………………..400mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
(-) Input 2
M212
3 (-/+) Load
Ordering Information
Part Number
Description
M212
M212-TR
4 pin SOP, (100/Tube)
4 pin SOP, Tape and Reel (2000/Reel)
© 2013 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
NOTE: Suffixes listed above are not included in marking on
device for part number identification
Page 1 of 7
M212/TR
Rev 2.00 (07/12/2013)
001603