|
M211-L Datasheet, PDF (1/4 Pages) Solid State Optronic – 1 Form A Solid State Relay | |||
|
M211-L
1 Form A
Solid State Relay
DESCRIPTION
The M211-L is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay in a miniature 4-pin small outline
package. It is designed to replace electromechanical relays in general purpose switching applications. The relay consists of an integrated
circuit that drives two rugged source-to-source enhancement type DMOS transistors - optically coupled to a light emitting diode. This
device also includes current-limiting circuitry. During increased load currents or transient current spikes, this circuitry acts to bring the
current down, protecting downstream components.
FEATURES
⢠High input-to-output isolation
⢠Low input control power consumption
⢠100mA maximum continuous load current
⢠40 ohms maximum on-resistance
⢠Long life/high reliability
⢠Ultra miniature 4-pin small outline package
⢠Current limiting
APPLICATIONS
⢠Telecom switching
⢠Tip/Ring control
⢠PCMCIA modules
⢠Multiplexers
⢠Meter reading systems
⢠Data acquisition
⢠Medical equipment
⢠Battery monitoring
⢠Home/Safety security systems
OPTIONS/SUFFIXES
MAXIMUM RATINGS
⢠-TR Tape and Reel
SCHEMATIC DIAGRAM
1
+ Input
4
Load
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
85
Continuous Input Current mA
40
2
- Input
IC
3
Load
Transient Input Current
mA
400
Reverse Input Control
Voltage
V
6
Output Power Dissipation mW
400
APPROVALS
⢠BABT CERTIFICATE #650192:
BS EN 60950, BS EN 41003, BS EN 60065
rev 1.0
Solid State Optronics, Inc.
1.888.377.4776
www.ssousa.com
|
▷ |