AD8C250 Datasheet, PDF (1/4 Pages) Solid State Optronic – 1 Form A Solid State Relay

AD8C250
1 Form A
Solid State Relay
DESCRIPTION
The AD8C250 is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. It is designed to replace
electromechanical and reed relays in special applications that call for very fast switching rates. The relay consists of an integrated circuit
that drives two special source-to-source enhancement type DMOS transistors with extremely low output capacitance and leakage current.
The IC is optically coupled to a light emitting diode which controls its switching. The design of the circuit makes it ideal for switching high
frequency signals.
FEATURES
• ^{High input-to-output isolation}
• ^{Low input control power consumption}
• ^{40mA maximum continuous load current}
• ^{300 ohms maximum on-resistance}
• ^{Long life/high reliability}
• ^{Fast switching speeds}
• ^{Low output capacitance}
APPLICATIONS
• ^{Telecom switching}
• ^{Tip/Ring control}
• ^{PCMCIA modules}
• ^Multiplexers
• ^{Meter reading systems}
• ^{Data acquisition}
• ^{Medical equipment}
• ^{Battery monitoring}
• ^{Home/Safety security systems}
OPTIONS/SUFFIXES
MAXIMUM RATINGS
• ^{-S Surface Mount Option}
• ^{-TR Tape and Reel}
PARAMETER
Storage Temperature
UNIT MIN TYP MAX
°C -55
125
SCHEMATIC DIAGRAM
Operating Temperature
°C -40
85
Continuous Input Current mA
40
Transient Input Current
mA
400
Reverse Input Control
Voltage
V
6
Output Power Dissipation mW
500
APPROVALS
• ^{BABT CERTIFICATE #608204:}
BS EN 60950, BS EN 41003, BS EN 60065
• ^{CSA CERTIFICATE #LR111581-1}
• ^{UL FILE #E90096}
rev 1.0
Solid State Optronics, Inc.
1.888.377.4776
www.ssousa.com