AD6C941 Datasheet, PDF (1/8 Pages) Solid State Optronic – Low Input Control Current (1mA TYP)

AD6C941
1 Form A
60V / 250mΩ
MOSFET Output Solid State Relay
Description
The AD6C941 is a bi-directional, single-pole, single-throw,
normally open multipurpose relay. It is designed to replace
electro-mechanical relays in general purpose switching
applications. The relay consists of an integrated circuit that
drives two rugged drain-to-drain enhancement type DMOS
transistors - optically coupled to a light emitting diode. The
output MOS transistors have extremely low on resistance
allowing the relay to high continuous load currents of up to
2.2 amps.
The AD6C941 comes standard in a miniature 6 pin DIP
package making it ideal for high-density board applications.
Applications
 Reed Relay Replacement
 Meter Reading Systems
 Data Acquisition
 Medical Equipment
 Battery Monitoring
 Safety Systems
Schematic Diagram
(+) Input 1
6 +/- Load
(-) Input 2
5 DC Connection
Do Not Use 3
AD6C941
4 -/+ Load
Features
 Low On Resistance (75m TYP)
 Low Input Control Current (1mA TYP)
 High Maximum Continuous Load Current (2.2 Amps)
 High Isolation Voltage (3.75kV_RMS, 5kV_RMS -H Option)
 Long Life / High Reliability
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature ………………………-40 to +85°C
Continuous Input Current ………………………………..50mA
Transient Input Current ………………….……………..500mA
Reverse Input Control Voltage …………..…………………5V
Input Power Dissipation…………………………………40mW
Output Power Dissipation ……………………………..800mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
Ordering Information
Part Number Description
AD6C941
AD6C941-H
AD6C941-S
AD6C941-HS
AD6C941-STR
AD6C941-HSTR
6 pin DIP, (50/Tube)
5kV_RMS V_ISO, 6 pin DIP, (50/Tube)
6 pin SMD, (50/Tube)
5kV_RMS, 6 pin SMD, (50/Tube)
6 pin SMD, Tape and Reel (1000/Reel)
5kV_RMS, 6 pin SMD, Tape and Reel (1000/Reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
© 2013 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 8
AD6C941/H/S/TR
Rev 1.00 (07/29/2013)
001612