AD6C742 Datasheet, PDF (1/8 Pages) Solid State Optronic – Compact 6 pin DIP/SMD Package

AD6C742
1 Form B
60V / 1Ω
MOSFET Output Solid State Relay
Description
The AD6C742 is a bi-directional, single-pole, single-throw,
normally closed multipurpose relay. It is designed to
replace electro-mechanical relays in general purpose
switching applications. The relay consists of an integrated
circuit that drives two rugged drain-to-drain depletion type
DMOS transistors - optically coupled to a light emitting
diode. The AD6C742 has an extremely low on resistance
(500mΩ TYP) and high load current capability (800mA),
giving the device unparalleled performance for a normally
closed relay.
The AD6C742 comes standard in a compact 6 pin DIP
package making it ideal for high-density board applications.
Applications
 Reed Relay Replacement
 Security Systems
 Meter Reading Equipment
 Data Acquisition
 Battery Monitoring
 Multiplexers
Schematic Diagram
(+) Input 1
6 +/- Load
(-) Input 2
5 DC Connection
Do Not Use 3
AD6C742
4 -/+ Load
Features
 Compact 6 pin DIP/SMD Package
 High Input-to-Output Isolation (up to 5V_RMS)
 Low Input Control Current (2.5mA TYP)
 800mA Maximum Continuous Load Current
 Low On Resistance (500m TYP)
 Long Life / High Reliability
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature ………………………-40 to +85°C
Continuous Input Current ………………………………..50mA
Transient Input Current ………………….……………..500mA
Reverse Input Control Voltage …………..…………………5V
Input Power Dissipation…………………………………40mW
Output Power Dissipation ……………………………..800mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
Ordering Information
Part Number Description
AD6C742
AD6C742-H
AD6C742-S
AD6C742-HS
AD6C742-STR
AD6C742-HSTR
6 pin DIP, (50/Tube)
5kV_RMS V_ISO, 6 pin DIP, (50/Tube)
6 pin SMD, (50/Tube)
5kV_RMS, 6 pin SMD, (50/Tube)
6 pin SMD, Tape and Reel (1000/Reel)
5kV_RMS, 6 pin SMD, Tape and Reel (1000/Reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
© 2013 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 8
AD6C742 H/S/TR
Rev 2.00 (11/25/2013)
001745