AD6C641 Datasheet, PDF (1/5 Pages) Solid State Optronic – Low on-resistance (0.35 ohm TYP)

AD6C641
1 Form A
Solid State Relay
DESCRIPTION
The AD6C641 is a bi-directional, single-pole, single-throw, normally open multipurpose relay. The relay consists of a GaAlAs LED
optically coupled to a Photo Diode Array that drives two extremely low on-resistance, rugged drain-to-drain enhancement type DMOS
transistors. Total device output resistance is guaranteed to be less than 0.5 ohms, making this device the ideal choice where minimal
signal attenuation is required.
FEATURES
• ^{Low on-resistance (0.35 ohm TYP)}
• ^{High Load Current Rating (1.5A MAX continuous load current)}
• ^{Low input power consumption}
• ^{High Input-to-Output isolation}
• ^{Long life-high reliability}
OPTIONS/SUFFIXES*
• ^{-S Surface Mount Leadform Option (50 pcs / tube)}
• ^{-TR Tape & Reel Option (1000 pcs / reel)}
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
APPLICATIONS
• ^Multiplexers
• ^{Meter reading systems}
• ^{Data Acquisition}
• ^{Medical Equipment}
• ^{Battery Monitoring}
• ^{Home Safety / Security Systems}
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
85
Continuous Input Current mA
50
Transient Input Current
mA
400
Reverse Input Control
Voltage
V
6
Output Power Dissipation mW
800
Solder Temperature -
ºC
260
Wave (10s)
Solder Temperature - IR
ºC
260
Reflow (10s)
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• ^{UL/C-UL Approved: File # E201932}
© 2008 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
AD6C641
rev 1.43 (2/19/2008)