English
Language : 

AD6C541_15 Datasheet, PDF (1/8 Pages) Solid State Optronic – Low On Resistance (1 Max)
AD6C541
1 Form A
60V / 1 Ω
MOSFET Output Solid State Relay
Description
The AD6C541 is a bi-directional, single-pole, single-throw,
normally open multipurpose relay. It is designed to replace
electro-mechanical relays in general purpose switching
applications. The relay consists of an integrated circuit that
drives two rugged drain-to-drain enhancement type DMOS
transistors - optically coupled to a light emitting diode. The
output MOS transistors have extremely low on
resistance making the relays ideal where minimal signal
attenuation is desired.
The AD6C541 comes standard in a miniature 6 pin DIP
package making it ideal for high-density board applications.
Applications
 Reed Relay Replacement
 Meter Reading Systems
 Data Acquisition
 Medical Equipment
 Battery Monitoring
 Safety Systems
Schematic Diagram
(+) Input 1
6 +/- Load
(-) Input 2
5 DC Connection
Do Not Use 3
AD6C541
4 -/+ Load
Features
 Low On Resistance (1 Max)
 Low Input Control Current (2.5mA TYP)
 700mA Maximum Continuous Load Current
 High Isolation Voltage (2.5kVRMS, 3.75kVRMS -H Option)
 Long Life / High Reliability
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature ………………………-40 to +85°C
Continuous Input Current ………………………………..50mA
Transient Input Current ………………….……………..500mA
Reverse Input Control Voltage …………..…………………5V
Input Power Dissipation…………………………………40mW
Output Power Dissipation ……………………………..800mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
Ordering Information
Part Number Description
AD6C541
AD6C541-H
AD6C541-S
AD6C541-HS
AD6C541-STR
AD6C541-HSTR
6 pin DIP, (50/Tube)
3.75kVRMS Viso, 6 pin DIP, (50/Tube)
6 pin SMD, (50/Tube)
3.75kVRMS, 6 pin SMD, (50/Tube)
6 pin SMD, Tape and Reel (1000/Reel)
3.75kVRMS, 6 pin SMD, Tape and Reel (1000/Reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
© 2013 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 8
AD6C541/H/S/TR
Rev 2.00 (01/25/2013)
001551