AD6C431 Datasheet, PDF (1/5 Pages) Solid State Optronic – 400mA maximum continuous load current

AD6C431
1 Form A
Solid State Relay
DESCRIPTION
The AD6C431 is a bi-directional, single-pole, single-throw, normally open multipurpose relay. It is designed to replace electro-mechanical
relays in many higher load current applications. The relay consists of an integrated circuit that drives two rugged drain-to-drain
enhancement type DMOS transistors - optically coupled to a light emitting diode. The output MOS transistors have low on resistance,
making the relays ideal where switching higher current loads is required.
FEATURES
• ^{400mA maximum continuous load current}
• ^{200V Blocking Voltage}
• ^{3 Ohms maximum on-resistance}
• ^{High input-to-output isolation}
• ^{Long life/high reliability}
• ^{Low input control power consumption}
OPTIONS/SUFFIXES*
• ^{-S Surface Mount Leadform Option}
• ^{-TR Tape and Reel Option}
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
APPLICATIONS
• ^{Reed relay replacement}
• ^{Meter reading systems}
• ^{Medical equipment}
• ^{Battery monitoring}
• ^Multiplexers
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
85
Continuous Input Current mA
40
Transient Input Current
mA
400
Reverse Input Control
Voltage
V
6
Output Power Dissipation mW
800
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• ^{BABT: Pending}
• ^{UL/C-UL: Pending}
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
AD6C431
rev 1.4 (10/25/04)