AD6C250 Datasheet, PDF (1/5 Pages) Solid State Optronic – 1 Form A Solid State Relay

AD6C250
1 Form A
Solid State Relay
DESCRIPTION
The AD6C250 is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. It is designed to replace
electromechanical and reed relays in special applications that call for very fast switching rates. The relay consists of an integrated circuit
that drives two special source-to-source enhancement type DMOS transistors with extremely low output capacitance and leakage current.
The IC is optically coupled to a light emitting diode which controls its switching. The design of the circuit makes it ideal for switching high
frequency signals.
FEATURES
• ^{Fast switching speed (Ton = 50 us TYP)}
• ^{Low output capacitance (3pF MAX)}
• ^{Low input control current (5mA MAX)}
• ^{High input-to-output isolation (2.5kV MIN)}
• ^{Long life/high reliability}
APPLICATIONS
• ^{Reed relay replacement}
• ^{Meter reading systems}
• ^{Medical equipment}
• ^{Battery monitoring}
• ^Multiplexers
OPTIONS/SUFFIXES*
ABSOLUTE MAXIMUM RATINGS*
• ^{-S Surface Mount Option}
• ^{-TR Tape and Reel Option}
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
85
Continuous Input Current mA
40
Transient Input Current
mA
400
Reverse Input Control
Voltage
V
6
Output Power Dissipation mW
800
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• ^{BABT CERTIFICATE #607836:}
• ^{CSA CERTIFICATE #LR111581-1}
• ^{UL FILE #E90096}
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
AD6C250
rev 1.4 (10/25/04)