AD6C223_15 Datasheet, PDF (1/9 Pages) Solid State Optronic – True 1 Form C Device

AD6C223
1 Form C
400V / 25 Ω
MOSFET Output Solid State Relay
Description
The AD6C223 is composed of two distinct relays; one
normally open and one normally closed sharing a common
input, making this a true 1 Form C device. Each relay has
a bi-directional, single-pole, single-throw contact controlled
simultaneously by an IR LED. The LED activates an
integrated circuit, which in turn drives each pair of DMOS
transistors. These transistors are protected with free-
wheeling diodes that can handle up to 1.5A of inrush
current, making the relay ideal for switching lamps and
highly inductive loads.
The AD6C223 comes standard in a miniature 6 pin DIP
package making it ideal for high-density board applications.
Applications
 Meter Reading Systems
 Multiplexers
 Data Acquisition
 Medical Equipment
 Battery Monitoring
 Home / Safety Security Systems
Schematic Diagram
(+) Input 1
6 Normally Closed
(-) Input 2
5 Common
Do Not Use 3
AD6C223
4 Normally Open
Features
 True 1 Form C Device
 Low Input Control Current (5mA MAX)
 150mA Maximum Continuous Load Current
 Low On Resistance (25 MAX – Both Poles)
 High Isolation Voltage (2.5kV_RMS, 3.75kV_RMS -H Option)
 Long Life / High Reliability
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature …………………………-40 to +85°C
Continuous Input Current ………………………………..50mA
Transient Input Current ………………….……………..500mA
Reverse Input Control Voltage …………..…………………6V
Input Power Dissipation…………………………………40mW
Output Power Dissipation ……………………………..800mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
Ordering Information
Part Number Description
AD6C223
AD6C223-H
AD6C223-S
AD6C223-HS
AD6C223-STR
AD6C223-HSTR
6 pin DIP, (50/Tube)
3.75kV_RMS Viso, 6 pin DIP, (50/Tube)
6 pin SMD, (50/Tube)
3.75kV_RMS, 6 pin SMD, (50/Tube)
6 pin SMD, Tape and Reel (1000/Reel)
3.75kV_RMS, 6 pin SMD, Tape and Reel (1000/Reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
© 2012 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 9
AD6C223/H/S/TR
Rev 2.00 (11/15/2012)
001535