English
Language : 

AD6C211-L Datasheet, PDF (1/5 Pages) Solid State Optronic – 1 Form A Solid State Relay
AD6C211-L
1 Form A
Solid State Relay
DESCRIPTION
The AD6C211-L is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. It is designed to replace
electromechanical relays in general purpose switching applications. The relay consists of an integrated circuit that drives two rugged
source-to-source enhancement type DMOS transistors - optically coupled to a light emitting diode. This device also includes current-
limiting circuitry. During increased load currents or transient current spikes, this circuitry acts to limit load current, thereby protecting the
device as well as downstream components.
FEATURES
APPLICATIONS
• Current limiting
• Low input control power consumption (2.5mA TYP)
• 140mA maximum continuous load current
• 25 ohms maximum on-resistance
• High input-to-output isolation
• Long life/high reliability
• Reed relay replacement
• Meter reading systems
• Medical equipment
• Battery monitoring
• Multiplexers
OPTIONS/SUFFIXES*
ABSOLUTE MAXIMUM RATINGS*
• -S Surface Mount Leadform Option
• -TR Tape and Reel Option
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
PARAMETER
Storage Temperature
Operating Temperature
UNIT MIN TYP MAX
°C -55
125
°C -40
85
SCHEMATIC DIAGRAM
Continuous Input Current mA
40
Transient Input Current
mA
400
Reverse Input Control
Voltage
V
6
Output Power Dissipation mW
800
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• BABT CERTIFICATE #607836:
BS EN 60950, BS EN 41003, BS EN 60065
• CSA CERTIFICATE #LR111581-1
• UL FILE #E90096
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
AD6C211-L
rev 1.40 (10/25/2004)