|
AD6C111-E Datasheet, PDF (1/4 Pages) Solid State Optronic – 1 Form A Solid State Relay | |||
|
AD6C111-E
1 Form A
Solid State Relay
DESCRIPTION
The AD6C111-E is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. It is designed to replace
electromechanical relays in general purpose switching applications. The relay consists of an integrated circuit that drives two rugged
source-to-source enhancement type DMOS transistors - optically coupled to a light emitting diode. The output MOS transistors are
protected with free-wheeling diodes that can handle up to 1.5A of inrush current, making the relay ideal for switching lamps and highly
inductive loads.
FEATURES
⢠High input-to-output isolation
⢠Low input control power consumption
⢠110mA maximum continuous load current
⢠40 ohms maximum on-resistance
⢠Long life/high reliability
APPLICATIONS
⢠Telecom switching
⢠Tip/Ring control
⢠PCMCIA modules
⢠Multiplexers
⢠Meter reading systems
⢠Data acquisition
⢠Medical equipment
⢠Battery monitoring
⢠Home/Safety security systems
OPTIONS/SUFFIXES
MAXIMUM RATINGS
⢠-H High Output Isolation
⢠-S Surface Mount Option
⢠-TR Tape and Reel
SCHEMATIC DIAGRAM
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
85
Continuous Input Current mA
40
Transient Input Current
mA
400
Reverse Input Control
Voltage
V
6
Output Power Dissipation mW
500
APPROVALS
⢠BABT CERTIFICATE #607836:
BS EN 60950, BS EN 41003, BS EN 60065
⢠CSA CERTIFICATE #LR111581-1
⢠UL FILE #E90096
rev 1.0
Solid State Optronics, Inc.
1.888.377.4776
www.ssousa.com
|
▷ |