English
Language : 

AD6C011 Datasheet, PDF (1/7 Pages) Solid State Optronic – High Blocking Voltage (800V)
AD6C011
1 Form A
800V / 35Ω
MOSFET Output Solid State Relay
Description
The AD6C011 is a bi-directional, single-pole, single-throw,
normally open multipurpose solid-state relay. The relay
consists of an IR LED optically coupled to a Photo Diode
Array, which in turn drives two open MOSFETs. The
AD6C011 provides high load voltage (800V) and high
input-to-output isolation (2.5kV).
The AD6C011 comes standard in a miniature 6 pin DIP
package, making it ideal for high-density board
applications.
Applications
 Multiplexers
 Meter Reading Systems
 Data Acquisition
 Medical Equipment
 Battery Monitoring
 Home Security Systems
 Safety Systems
Schematic Diagram
+ Input 1
-2
NC 3
6 +/-
5 Do Not Connect
4 -/+
AD6C011
Features
 High Blocking Voltage (800V)
 100mA Maximum Continuous Load Current
 Small 6 pin DIP/SMD Package
 High Isolation Voltage (2500VRMS)
 Long Life / High Reliability
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL:
C-UL:
File # E201932
File # E201932
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature …………………………-40 to +85°C
Continuous Input Current ………………………………..50mA
Transient Input Current ………………….……………..500mA
Reverse Input Control Voltage …………..…………………5V
Input Power Dissipation…………………………………40mW
Output Power Dissipation ……………………………..800mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
Ordering Information
Part Number Description
AD6C011
AD6C011-S
AD6C011-STR
6 pin DIP, (50/Tube)
6 pin SMD, (50/Tube)
6 pin SMD, Tape and Reel (1000/Reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
© 2011 Solid State Optronics • San Jośe, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 7
AD6C011/S/TR
Rev 2.00 (06/20/2011)