AD4C542 Datasheet, PDF (1/8 Pages) Solid State Optronic – Low Input Control Current (2.5mA TYP)

AD4C542
Dual 1 Form B
60V / 2Ω
MOSFET Output Solid State Relay
Description
The AD4C542 is composed of two distinct 1 Form B
(normally closed) relays in one compact 8 pin DIP package.
Each relay consists of an AlGaAs LED optically coupled to
a Photo Diode Array, driving a pair of rugged source-to-
source depletion type DMOS transistors. The output MOS
transistors are protected with free-wheeling diodes that can
handle up to 1.5A of inrush current, making the relay ideal
for switching lamps and highly inductive loads.
The AD4C542 comes standard in a compact 8 pin DIP
package making it ideal for high-density board applications.
Applications
 Meter Reading Systems
 Multiplexers
 Data Acquisition
 Medical Equipment
 Battery Monitoring
 Home / Safety Security Systems
Schematic Diagram
(+) Input 1 1
8 (+/-) Load 1
(-) Input 1 2
7 (-/+) Load 1
(+) Input 2 3
6 (+/-) Load 2
(-) Input 2 4
AD4C542
5 (-/+) Load 2
Features
 Low Input Control Current (2.5mA TYP)
 300mA Maximum Continuous Load Current (per Channel)
 Low On Resistance (1Ω TYP)
 High Isolation Voltage (up to 5kV_RMS)
 Long Life / High Reliability
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature …………………………-40 to +85°C
Continuous Input Current ………………………………..50mA
Transient Input Current ………………….……………..500mA
Reverse Input Control Voltage …………..…………………5V
Input Power Dissipation…………………………………40mW
Output Power Dissipation ……………………………..800mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
Ordering Information
Part Number Description
AD4C542
AD4C542-H
AD4C542-S
AD4C542-HS
AD4C542-STR
AD4C542-HSTR
8 pin DIP, (50/Tube)
5kV_RMS Viso, 8 pin DIP, (50/Tube)
8 pin SMD, (50/Tube)
5kV_RMS, 8 pin SMD, (50/Tube)
8 pin SMD, Tape and Reel (1000/Reel)
5kV_RMS, 8 pin SMD, Tape and Reel (1000/Reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
© 2013 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 8
AD4C542 H/S/TR
Rev 2.00 (11/25/2013)
001748