AD4C541 Datasheet, PDF (1/5 Pages) Solid State Optronic – Dual 1 Form A Solid State Relay

AD4C541
Dual 1 Form A
Solid State Relay
DESCRIPTION
The AD4C541 is a bi-directional, double-pole, single-throw, normally open solid-state relay. This device consists of two discrete relays in
a compact 8 pin package. Each relay is composed of a AlGaAs LED optically coupled to an IC--driving a pair of source-to-source
enhancement type DMOS transistors. Low on-resistance allows for a high load current rating--making the AD4C541 ideal in applications
where packaging density and high load current requirements present unique design challenges.
FEATURES
• ^{Low On-Resistance (1 ohm MAX)}
• ^{Low input control power consumption (2.5mA TYP)}
• ^{High load current rating (700mA MAX, single pole)}
• ^{High input-to-output isolation (2500V MIN)}
• ^{Long life/high reliability}
OPTIONS/SUFFIXES*
• ^{-H High Output Isolation}
• ^{-S Surface Mount Option}
• ^{-TR Tape and Reel Option}
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
APPLICATIONS
• ^{Reed relay replacement}
• ^{Meter reading systems}
• ^{Medical equipment}
• ^{Battery monitoring}
• ^Multiplexers
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
85
Continuous Input Current mA
40
Transient Input Current
mA
400
Reverse Input Control
Voltage
V
6
Output Power Dissipation mW
800
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• ^{UL File # E209132}
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
AD4C541
rev 1.40 (10/25/2004)