AD4C332 Datasheet, PDF (1/5 Pages) Solid State Optronic – Dual 1 Form B Solid State Relay

AD4C332
Dual 1 Form B
Solid State Relay
DESCRIPTION
The AD4C332 is a bi-directional, double-pole, single-throw, normally closed multipurpose solid-state relay. It consists of two discrete solid
state relays in a compact 8 pin package. Each relay is composed of a GaAlAs LED optically coupled to an IC--driving a pair of rugged
source-to-source depletion type DMOS transistors.
FEATURES
• ^{Two discrete 1 Form B relays in 1 package}
• ^{Low On-Resistance (10 Ohms MAX)}
• ^{Low input control power consumption (2.5mA TYP)}
• ^{200mA maximum continuous load current}
• ^{High input-to-output isolation}
• ^{Long life/high reliability}
OPTIONS/SUFFIXES*
• ^{-S Surface Mount Option}
• ^{-TR Tape and Reel Option}
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
APPLICATIONS
• ^{Reed relay replacement}
• ^{Meter reading systems}
• ^{Medical equipment}
• ^{Battery monitoring}
• ^Multiplexers
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
85
Continuous Input Current mA
40
Transient Input Current
mA
400
Reverse Input Control
Voltage
V
6
Output Power Dissipation mW
800
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• ^{BABT CERTIFICATE #607836:}
BS EN 60950, BS EN 41003, BS EN 60065
• ^{CSA CERTIFICATE #LR111581-1}
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
AD4C332
rev 1.40 (10/25/2004)