AD4C313 Datasheet, PDF (1/9 Pages) Solid State Optronic – 180mA Maximum Continuous Load Current

AD4C313
1 Form A / 1 Form B
400V / 15 Ω
MOSFET Output Solid State Relay
Description
The AD4C313 is composed of two isolated relays; one
normally open and one normally closed. Each relay has a
bi-directional, single-pole, single-throw contact. Completely
independent of its counterpart, each consists of an LED
driver that activates an integrated circuit, which in turn
drives a pair of DMOS transistors. These transistors are
protected with free-wheeling diodes that can handle up to
1.5A of inrush current, making the relay ideal for switching
lamps and highly inductive loads.
The AD4C313 comes standard in a compact 8 pin DIP
package making it ideal for high-density board applications.
Applications
 Meter Reading Systems
 Multiplexers
 Data Acquisition
 Medical Equipment
 Battery Monitoring
 Home / Safety Security Systems
Schematic Diagram
Features
 1 Form A / 1 Form B Integrated in Single Package
 Low Input Control Current (2.5mA TYP)
 180mA Maximum Continuous Load Current
 Low On Resistance (15 MAX)
 High Isolation Voltage (up to 5kV_RMS)
 Long Life / High Reliability
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature …………………………-40 to +85°C
Continuous Input Current ………………………………..50mA
Transient Input Current ………………….……………..500mA
Reverse Input Control Voltage …………..…………………5V
Input Power Dissipation…………………………………40mW
Output Power Dissipation ……………………………..800mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
Ordering Information
Part Number Description
AD4C313
AD4C313-H
AD4C313-S
AD4C313-HS
AD4C313-STR
AD4C313-HSTR
8 pin DIP, (50/Tube)
5kV_RMS Viso, 8 pin DIP, (50/Tube)
8 pin SMD, (50/Tube)
5kV_RMS, 8 pin SMD, (50/Tube)
8 pin SMD, Tape and Reel (1000/Reel)
5kV_RMS, 8 pin SMD, Tape and Reel (1000/Reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
© 2013 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 9
AD4C313 H/S/TR
Rev 2.00 (11/25/2013)
001750