AD4C201 Datasheet, PDF (1/8 Pages) Solid State Optronic – High Blocking Voltage (600V)

AD4C201
Dual 1 Form A
600V / 20 Ω
MOSFET Output Solid State Relay
Description
The AD4C201 is a bi-directional, double-pole, single-throw,
normally open MOSFET output solid-state relay. This
device offers two discrete and independently controlled
optically isolated SSRs in one miniature 8 pin package.
Each discrete relay consists of an infrared LED, optically
coupled to a Photo Diode Array, which in turn drives a pair
of back-to-back enhancement MOSFETs. Its high blocking
voltage (600V) and the integration of two devices in one
package make the AD4C201 ideal in high load voltage
applications where board space is limited.
The AD4C201 comes standard in a compact 8 pin DIP
package making it ideal for high-density board applications.
Applications
 EMR Replacement
 Meter Reading Systems
 Medical Equipment
 Battery Monitoring
 Multiplexers
Schematic Diagram
(+) Input 1 1
8 (+/-) Load 1
(-) Input 1 2
7 (-/+) Load 1
(+) Input 2 3
6 (+/-) Load 2
(-) Input 2 4
AD4C201
5 (-/+) Load 2
Features
 High Blocking Voltage (600V)
 Low Input Control Current (2.5mA TYP)
 150mA Maximum Continuous Load Current
 Low On Resistance (17 TYP)
 High Isolation Voltage (3.75kV_RMS, Optional 5kV_RMS)
 Long Life / High Reliability
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature …………………………-40 to +85°C
Continuous Input Current ………………………………..50mA
Transient Input Current …..…. ..……….……………..400mA
Reverse Input Control Voltage …………..…………………5V
Input Power Dissipation…………………………………40mW
Output Power Dissipation ……………………………..800mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
Ordering Information
Part Number Description
AD4C201
AD4C201-H
AD4C201-S
AD4C201-HS
AD4C201-STR
AD4C201-HSTR
8 pin DIP, (50/Tube)
5kV_RMS Viso, 8 pin DIP, (50/Tube)
8 pin SMD, (50/Tube)
5kV_RMS, 8 pin SMD, (50/Tube)
8 pin SMD, Tape and Reel (1000/Reel)
5kV_RMS, 8 pin SMD, Tape and Reel (1000/Reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
© 2013 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 8
AD4C201 /H/S/TR
Rev 2.00 (11/25/2013)
001746