AD4C111_15 Datasheet, PDF (1/5 Pages) Solid State Optronic – Two discrete 1 form A Relays in compact 8 pin DIP package

AD4C111
Dual 1 Form A
Solid State Relay
DESCRIPTION
The AD4C111 is a bi-directional, double-pole, single-throw, normally open multipurpose solid-state relay. It is designed to replace
electromechanical relays in general purpose switching applications. The relay consists of two integrated circuits, each driving a pair of
rugged source-to-source enhancement type DMOS transistors. Each integrated circuit is optically coupled to a light emitting diode. The
output MOS transistors are protected with free-wheeling diodes that can handle up to 1.5A of inrush current, making the relay ideal for
switching lamps and highly inductive loads.
FEATURES
APPLICATIONS
• ^{Two discrete 1 form A Relays in compact 8 pin DIP package}
• ^{Low input control power consumption (2mA TYP)}
• ^{120mA maximum continuous load current}
• ^{30 ohms maximum on-resistance}
• ^{High input-to-output isolation}
• ^{Long life/high reliability}
• ^{RoHS / Pb-Free / REACH Compliant}
• ^Multiplexers
• ^{Meter reading systems}
• ^{Data Acquisition}
• ^{Medical equipment}
• ^{Battery monitoring}
• ^{Home/Safety security systems}
OPTIONS/SUFFIXES*
ABSOLUTE MAXIMUM RATINGS*
• ^{-S Surface Mount Leadform Option (50 pcs / tube)}
• ^{-TR Tape and Reel Packing Option (1,000 pcs / reel)}
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
PARAMETER
Storage Temperature
Operating Temperature
UNIT MIN TYP MAX
°C -55
125
°C -40
85
SCHEMATIC DIAGRAM
Continuous Input Current mA
40
Transient Input Current
mA
400
Reverse Input Control
Voltage
V
6
Output Power Dissipation mW
800
Solder Temperature -
ºC
260
Wave (10s)
Solder Temperature - IR
ºc
260
Reflow (10s)
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• ^{UL / C-UL Approved: FILE #E90096, E201932}
• ^{CSA Approved: CERTIFICATE #LR111581-1}
© 2011 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
AD4C111
rev 1.42 (2/4/2011)