AD2C741 Datasheet, PDF (1/8 Pages) Solid State Optronic – Compact 4 pin DIP/SMD Package

AD2C741
1 Form A
60V / 250mΩ
MOSFET Output Solid State Relay
Description
The AD2C741 is a bi-directional, single-pole, single-throw,
normally open multipurpose solid-state relay. It is designed
to replace electromechanical relays in general purpose
switching applications. The relay consists of an IR LED
optically coupled to an IC that drives two rugged source-to-
source enhancement type DMOS transistors. Total device
output resistance is guaranteed to be less than 250mΩ
making this device the ideal choice where minimal signal
attenuation is required. The device comes with up to 5kV
input to output isolation.
The AD2C741 comes standard in a compact 4 pin DIP
package making it ideal for high-density board applications.
Applications
 Multiplexers
 Meter Reading Systems
 Data Acquisition
 Medical Equipment
 Battery Monitoring
 Home Safety / Security Systems
Schematic Diagram
Features
 Compact 4 pin DIP/SMD Package
 High Isolation Voltage (up to 5kV_RMS)
 Low Input Control Current (2.5mA TYP)
 170mΩ Typical On Resistance
 1.3A Maximum Continuous Load Current
 Long Life / High Reliability
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature …………………………-40 to +85°C
Continuous Input Current ………………………………..50mA
Transient Input Current ………………….……………..500mA
Reverse Input Control Voltage …………..…………………5V
Input Power Dissipation…………………………………40mW
Output Power Dissipation ……………………………..500mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
Ordering Information
Part Number Description
AD2C741
AD2C741-H
AD2C741-S
AD2C741-HS
AD2C741-STR
AD2C741-HSTR
4 pin DIP, (100/Tube)
5kV_RMS Viso, 4 pin DIP, (100/Tube)
4 pin SMD, (100/Tube)
5kV_RMS, 8 pin SMD, (100/Tube)
4 pin SMD, Tape and Reel (2000/Reel)
5kV_RMS, 4 pin SMD, Tape and Reel (2000/Reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
© 2013 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 8
AD2C741 H/S/TR
Rev 2.00 (11/25/2013)
001738