AD2C542 Datasheet, PDF (1/8 Pages) Solid State Optronic – Compact 4 pin DIP/SMD Package

AD2C542
1 Form B
60V / 2Ω
MOSFET Output Solid State Relay
Description
The AD2C542 is a bi-directional, single-pole, single-throw,
normally closed multipurpose relay. It is designed to
replace electro-mechanical relays in general purpose
switching applications. The relay consists of an integrated
circuit that drives two rugged drain-to-drain depletion type
DMOS transistors - optically coupled to a light emitting
diode. The output MOS transistors have low on resistance
(1 Ohm TYP) making the relays ideal where minimal signal
attenuation is desired.
The AD2C542 comes standard in a miniature 4 pin DIP
package making it ideal for high-density board applications.
Applications
 Reed Relay Replacement
 Meter Reading Systems
 Data Acquisition
 Medical Equipment
 Battery Monitoring
 Safety Systems
Schematic Diagram
Features
 Compact 4 pin DIP/SMD Package
 High Isolation Voltage (up to 5kV_RMS)
 Low Input Control Current (1.5mA TYP)
 1Ω Typical On Resistance
 500mA Maximum Continuous Load Current
 Long Life / High Reliability
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature …………………………-40 to +85°C
Continuous Input Current ………………………………..50mA
Transient Input Current ………………….……………..500mA
Reverse Input Control Voltage …………..…………………5V
Input Power Dissipation…………………………………40mW
Output Power Dissipation ……………………………..500mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
© 2013 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Ordering Information
Part Number Description
AD2C542
AD2C542-H
AD2C542-S
AD2C542-HS
AD2C542-STR
AD2C542-HSTR
4 pin DIP, (100/Tube)
5kV_RMS Viso, 8 pin DIP, (100/Tube)
4 pin SMD, (100/Tube)
5kV_RMS, 4 pin SMD, (100/Tube)
4 pin SMD, Tape & Reel (2000/Reel)
5kV_RMS, 4 pin SMD, Tape & Reel (2000/Reel)
NOTE: Suffixes listed above are not included in marking on device
for part number identification
Page 1 of 8
AD2C542 H/S/TR
Rev 2.00 (10/25/2013)
001661