AD2C541 Datasheet, PDF (1/5 Pages) Solid State Optronic – Solid State Relay

AD2C541
1 Form A
Solid State Relay
DESCRIPTION
The AD2C541 is a bi-directional, single-pole, single-throw, normally open high power solid-state relay. The relay consists of IR LED
optically coupled to an IC that drives two rugged source-to-source low on-resistance enhancement type DMOS transistors. With high load
current rating (500mA), high isolation (5kV) and compact package size, the AD2C541 is ideally suited to high power applications where
board space is at a premium.
FEATURES
• ^{Low On-Resistance (1 ohm MAX)}
• ^{High Load Current (500mA)}
• ^{Small package outline (4DIP) - reduces board space}
• ^{High input-to-output Isolation (5kV)}
• ^{Low input control power consumption (2.5mA TYP)}
• ^{Long life / Solid State reliability}
OPTIONS/SUFFIXES*
• ^{-S Surface Mount leadform option (65 pcs / tube)}
• ^{-TR Tape & Reel option (2,000 pcs / reel)}
• ^{-V VDE0884 compliant lead spacing (0.4" / 10.16mm)}
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
1
+ INPUT
2
- INPUT
4
LOAD
3
LOAD
APPLICATIONS
• ^{Reed relay replacement}
• ^{Meter reading systems}
• ^{Medical equipment}
• ^{Battery monitoring}
• ^Multiplexers
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -40
150
Operating Temperature
°C -40
85
Continuous Input Current mA
50
Transient Input Current
mA
400
(1us)
Reverse Input Control
V
5
Voltage
Output Power Dissipation mW
500
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• _{UL/C-UL Approved: File E201932}
© 2008 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
AD2C541
rev 1.42 (5/15/2008)