AD2C211 Datasheet, PDF (1/8 Pages) Solid State Optronic – Compact 4DIP/SMD Package

AD2C211
1 Form A
400V / 20Ω
MOSFET Output Solid State Relay
Description
The AD2C211 is a bi-directional, single-pole, single-throw,
normally open multipurpose solid-state relay. It is designed
to replace electromechanical relays in general purpose
switching applications. The relay consists of an IR LED
optically coupled to an IC that drives two rugged source-to-
source enhancement type DMOS transistors. The devices
comes with up to 5kV input to output isolation.
The AD2C211 comes standard in a compact 4 pin DIP
package making it ideal for high-density board applications.
Applications
 Reed Relay Replacement
 Meter Reading Systems
 Data Acquisition
 Medical Equipment
 Battery Monitoring
 Safety Systems
Schematic Diagram
(+) Input 1
4 (+/-) Load
(-) Input 2
AD2C211
3 (-/+) Load
Features
 Compact 4DIP/SMD Package
 High Isolation Voltage (up to 5kV_RMS)
 Low Input Control Current (2.5mA TYP)
 17Ω Typical On Resistance
 150mA Maximum Continuous Load Current
 Long Life / High Reliability
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature …………………………-40 to +85°C
Continuous Input Current ………………………………..50mA
Transient Input Current ………………….……………..500mA
Reverse Input Control Voltage …………..…………………5V
Input Power Dissipation…………………………………40mW
Output Power Dissipation ……………………………..500mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
Ordering Information
Part Number Description
AD2C211
AD2C211-H
AD2C211-S
AD2C211-HS
AD2C211-STR
AD2C211-HSTR
4 pin DIP, (100/Tube)
5kV_RMS Viso, 4 pin DIP, (100/Tube)
4 pin SMD, (100/Tube)
5kV_RMS, 8 pin SMD, (100/Tube)
4 pin SMD, Tape and Reel (2000/Reel)
5kV_RMS, 4 pin SMD, Tape and Reel (2000/Reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
© 2013 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 8
AD2C211 H/S/TR
Rev 2.00 (11/12/2013)
001735