AD2C211-L Datasheet, PDF (1/8 Pages) Solid State Optronic – Low Input Control Current (3mA TYP)

AD2C211-L
1 Form A, Current Limiting
400V / 25Ω
MOSFET Output Solid State Relay
Description
The AD2C211-L is a bi-directional, single-pole, single-
throw, normally open solid-state relay. It provides a load
current of 150mA, a high blocking voltage of 400V, and
current limiting circuitry in a compact 4 pin DIP package.
Current limiting circuitry provides a level of protection
against increased load currents or transient current spikes
by active current reduction across the device, thereby
protecting itself and downstream components.
The AD2C211-L comes standard in a compact 4 pin DIP
package making it ideal for high-density board applications.
Applications
 Reed Relay Replacement
 Meter Reading Systems
 Data Acquisition
 Medical Equipment
 Battery Monitoring
 Safety Systems
Schematic Diagram
AD2C211-L
Features
 High Isolation Voltage (up to 5kV_RMS)
 Low Input Control Current (3mA TYP)
 25Ω Maximum On Resistance
 150mA Maximum Continuous Load Current
 Active Current Limiting Protection
 Long Life / High Reliability
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL / C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature …………………………-40 to +85°C
Continuous Input Current ………………………………..50mA
Transient Input Current ………………….……………..500mA
Reverse Input Control Voltage …………..…………………5V
Input Power Dissipation…………………………………40mW
Output Power Dissipation ……………………………..500mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
Ordering Information
Part Number Description
AD2C211-L
4 pin DIP, (100/Tube)
AD2C211-LH
5kV_RMS Viso, 4 pin DIP, (100/Tube)
AD2C211-LS
4 pin SMD, (100/Tube)
AD2C211-LHS 5kV_RMS, 4 pin SMD, (100/Tube)
AD2C211-LSTR 4 pin SMD, Tape and Reel (2000/Reel)
AD2C211-LHSTR 5kV_RMS, 4 pin SMD, Tape and Reel (2000/Reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
© 2015 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 8
AD2C211-L H/S/TR
Rev 1.00 (02/27/2015)
002416