AD2C201 Datasheet, PDF (1/8 Pages) Solid State Optronic – Compact 4 pin DIP/SMD Package

AD2C201
1 Form A
600V / 20Ω
MOSFET Output Solid State Relay
Description
The AD2C201 is a bi-directional, single-pole, single-throw,
normally open multipurpose solid-state relay in a compact 4
pin DIP package. With a high blocking voltage (600V) and
low on-resistance, it is ideally suited to high voltage
applications requiring higher load currents. The relay
consists of an integrated circuit that drives two rugged
source-to-source enhancement type DMOS transistors –
optically coupled to a light emitting diode. The output MOS
transistors are protected with free-wheeling diodes that can
handle up to 1.5A of inrush current
The AD2C201 comes standard in a miniature 4 pin DIP
package making it ideal for high-density board applications.
Applications
 Reed Relay Replacement
 Security Systems
 Meter Reading Equipment
 Data Acquisition
 Battery Monitoring
 Multiplexers
Schematic Diagram
Features
 Compact 4 pin DIP/SMD Package
 High Input-to-Output Isolation (up to 5V_RMS)
 Low Input Control Current (2mA TYP)
 150mA Maximum Continuous Load Current
 Low On Resistance (17 TYP)
 Long Life / High Reliability
 RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL:
VDE:
File # E201932
File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional
operation of the device is not implied at these or any
conditions in excess of those defined in electrical
characteristics section of this document. Exposure to
absolute Maximum Ratings may cause permanent damage
to the device and may adversely affect reliability.
Storage Temperature …………………………..-55 to +125°C
Operating Temperature …………………………-40 to +85°C
Continuous Input Current ………………………………..50mA
Transient Input Current ………………….……………..500mA
Reverse Input Control Voltage …………..…………………5V
Input Power Dissipation…………………………………40mW
Output Power Dissipation ……………………………..500mW
Solder Temperature – Wave (10sec)……………….….260°C
Solder Temperature – IR Reflow (10sec)….…………..260°C
Ordering Information
Part Number Description
AD2C201
AD2C201-H
AD2C201-S
AD2C201-HS
AD2C201-STR
AD2C201-HSTR
4 pin DIP, (100/Tube)
5kV_RMS Viso, 4 pin DIP, (100/Tube)
4 pin SMD, (100/Tube)
5kV_RMS, 8 pin SMD, (100/Tube)
4 pin SMD, Tape and Reel (2000/Reel)
5kV_RMS, 4 pin SMD, Tape and Reel (2000/Reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification
© 2013 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 8
AD2C201 H/S/TR
Rev 2.00 (11/12/2013)
001734