English
Language : 

AD2C111_15 Datasheet, PDF (1/5 Pages) Solid State Optronic – Small 4 pin DIP package outline - reduces board space
AD2C111
1 Form A
Solid State Relay
DESCRIPTION
The AD2C111 is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. It is designed to replace
electromechanical relays in general purpose switching applications. The relay consists of IR LED optically coupled to a IC that drives two
rugged source-to-source enhancement type DMOS transistors. The 4 pin DIP package offers the combination of reduced package size,
with 5kV input to output isolation.
FEATURES
• Small 4 pin DIP package outline - reduces board space
• High input-output isolation (5kVrms)
• Low input control power consumption (2mA TYP)
• 130mA maximum continuous load current
• 30 ohms maximum on-resistance
• Long life/high reliability
• RoHS / Pb-Free / REACH Compliant
OPTIONS/SUFFIXES*
• -S Surface Mount Leadform Option (65pcs / tube)
• -TR Tape and Reel Packing Option (2,000 pcs / reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
1
+ INPUT
2
- INPUT
4
LOAD
3
LOAD
APPLICATIONS
• Reed relay replacement
• Meter reading systems
• Medical Equipment
• Battery Monitoring
• Multiplexers
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -40
125
Operating Temperature
°C -40
85
Continuous Input Current mA
50
Transient Input Current
mA
1
(1us)
Reverse Input Control
V
5
Voltage
Output Power Dissipation mW
500
Solder Temperature -
°C
260
Wave (10s)
Solder Temperature - IR
°C
260
Reflow (10s)
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• UL / C-UL Approved: File # E201932
© 2011 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
AD2C111
rev 1.43 (2/4/2011)