AD2C111 Datasheet, PDF (1/5 Pages) Solid State Optronic – Solid State Relay

AD2C111
1 Form A
Solid State Relay
DESCRIPTION
The AD2C111 is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. It is designed to replace
electromechanical relays in general purpose switching applications. The relay consists of an integrated circuit that drives two rugged
source-to-source enhancement type DMOS transistors - optically coupled to a light emitting diode.
FEATURES
• ^{Low input control power consumption (2.5mA TYP)}
• ^{130mA maximum continuous load current}
• ^{30 ohms maximum on-resistance}
• ^{High input-to-output isolation}
• ^{Long life/high reliability}
OPTIONS/SUFFIXES*
• ^{-H .04" (10.16mm) lead spacing (VDE0884)}
• ^{-S Surface Mount Option}
• ^{-TR Tape and Reel Option}
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
1
+ INPUT
2
- INPUT
4
LOAD
3
LOAD
APPLICATIONS
• ^{Reed relay replacement}
• ^{Meter reading systems}
• ^{Medical equipment}
• ^{Battery monitoring}
• ^Multiplexers
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -40
150
Operating Temperature
°C -40
85
Continuous Forward
mA
50
Current
Peak Forward Current
A
1
Reverse Voltage
V
5
Output Power Dissipation mW
500
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• UL FILE #E201932
• ^{C-UL FILE #E201932}
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
AD2C111
rev 1.40 (10/25/2004)