English
Language : 

AD2C101_15 Datasheet, PDF (1/5 Pages) Solid State Optronic – High Blocking Voltage (600V)
AD2C101
1 Form A
Solid State Relay
DESCRIPTION
The AD2C101 is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. The relay consists of an IR LED
optically coupled to a Photo Diode Array, which in turn drives two output MOSFETs. The AD2C101 provides high load voltage (600V) and
high input-to-output isolation (5kV) in a miniature 4 pin DIP / SMD package, making it ideal for high-density board applications.
FEATURES
• High Blocking Voltage (600V)
• Small 4-pin DIP / SMD package
• High input-to-output isolation (5000Vrms)
• 100mA maximum continuous load current
• 40 ohms maximum on-resistance
• Long life/high reliability
OPTIONS/SUFFIXES*
• -S Surface Mount Option (65 pcs / tube)
• -TR Tape and Reel Option (2000 pcs / reel)
• -V .04" (10.16mm) lead spacing (VDE0884)
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
1
+ INPUT
2
- INPUT
4
LOAD
3
LOAD
APPLICATIONS
• Multiplexers
• Meter reading systems
• Data Acquisition
• Medical equipment
• Battery monitoring
• Home/Safety security systems
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -40
150
Operating Temperature
°C -40
85
Continuous Input Current mA
50
Transient Input Current
mA
400
(1us)
Reverse Input Control
V
5
Voltage
Output Power Dissipation mW
500
Solder Temperature -
°C
260
Wave (10s)
Solder Temperature - IR
°C
260
Reflow (10s)
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• UL / C-UL Approved: File E201932
© 2008 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
AD2C101
rev 1.42 (5/15/2008)