US2A Datasheet, PDF (1/1 Pages) Shanghai Sunrise Electronics – SURFACE MOUNT ULTRA FAST SWITCHING RECTIFIER

SHANGHAI SUNRISE ELECTRONICS CO., LTD.
US2A THRU US2M
SURFACE MOUNT ULTRA
FAST SWITCHING RECTIFIER
TECHNICAL
SPECIFICATION
VOLTAGE: 50 TO 1000V CURRENT: 2.0A
FEATURES
• Ideal for surface mount pick and
place application
• Low profile package
• Built-in strain relief
• High surge capability
• Glass passivated chip
• Ultra fast recovery for high efficiency
• High temperature soldering guaranteed:
260^oC/10sec/at terminal
MECHANICAL DATA
• Terminal: Plated leads solderable per
MIL-STD 202E, method 208C
• Case: Molded with UL-94 Class V-O
recognized flame retardant epoxy
• Polarity: Color band denotes cathode
SMB/DO-214AA
B
A
C
F
G
D
H
A
B
C
D
MAX. .155(3.94) .180(4.57) .083(2.11) .012(0.305)
MIN. .130(3.30) .160(4.06) .077(1.96) .006(0.152)
E
F
G
H
MAX. .220(5.59) .096(2.44) .008(0.203) .060(1.52)
MIN. .205(5.21) .084(2.13) .004(0.102) .030(0.76)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25^oC, unless otherwise stated, for capacitive load,
derate current by 20%)
RATINGS
SYMBOL
US
2A
US
2B
US
2D
US
2G
US
2J
US
2K
US
2M
UNITS
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
(T_L=90^oC)
Peak Forward Surge Current (8.3ms single
half sine-wave superimposed on rated load)
Maximum Instantaneous Forward Voltage
(at rated forward current)
Maximum DC Reverse Current
(at rated DC blocking voltage)
Maximum Reverse Recovery Time
T_a=25^oC
T_a=100^oC
(Note 1)
V_RRM
V_RMS
V_DC
I_F(AV)
I_FSM
V_F
I_R
trr
50 100 200 400 600 800 1000 V
35 70 140 280 420 560 700 V
50 100 200 400 600 800 1000 V
2.0
A
50
A
1.0
1.4
1.7
V
5.0
µA
350
µA
50
75
nS
Typical Junction Capacitance
(Note 2) C_J
25
pF
Typical Thermal Resistance
(Note 3) R_θ(ja)
20
o_C/W
Storage and Operation Junction Temperature T_STG,T_J
-50 to +150
o_C
Note:
1.Reverse recovery condition I_F=0.5A, I_R=1.0A,Irr=0.25A.
2.Measured at 1.0 MHz and applied voltage of 4.0V_dc
3.Thermal resistance from junction to terminal mounted on 5×5mm copper pad area
http://www.sse-diode.com