RS2A Datasheet, PDF (1/2 Pages) Shanghai Sunrise Electronics – SURFACE MOUNT FAST SWITCHING RECTIFIER

SHANGHAI SUNRISE ELECTRONICS CO., L
RS2A THRU RS2M
SURFACE MOUNT FAST
SWITCHING RECTIFIER
VOLTAGE: 50 TO 1000V CURRENT: 2.0A
TECHNICAL
SPECIFICATION
FEATURES
• Ideal for surface mount pick and
place application
• Low profile package
• Built-in strain relief
• High surge capability
• Glass passivated chip
• Fast recovery for high efficiency
• High temperature soldering guaranteed:
260^oC/10sec/at terminal
MECHANICAL DATA
• Terminal: Plated leads solderable per
MIL-STD 202E, method 208C
• Case: Molded with UL-94 Class V-O
recognized flame retardant epoxy
• Polarity: Color band denotes cathode
SMB/DO-214AA
B
A
C
F
G
D
H
A
B
C
D
MAX. .155(3.94) .180(4.57) .083(2.11) .012(0.305
MIN. .130(3.30) .160(4.06) .077(1.96) .006(0.152
E
F
G
H
MAX. .220(5.59) .096(2.44) .008(0.203) .060(1.52
MIN. .205(5.21) .084(2.13) .004(0.102) .030(0.76
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25^oC, unless otherwise stated, for
capacitive load, derate current by 20%)
RATINGS
RS RS RS RS RS RS RS
SYMBOL
2A 2B 2D 2G 2J 2K 2M
Maximum Repetitive Peak Reverse Voltage
V_RRM 50 100 200 400 600 800 1000
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700
Maximum DC Blocking Voltage
V_DC
50 100 200 400 600 800 1000
Maximum Average Forward Rectified Current
(T_L=110^oC)
I_F(AV)
2.0
Peak Forward Surge Current (8.3ms single
half sine-wave superimposed on rated load)
I_FSM
50
Maximum Instantaneous Forward Voltage
(at rated forward current)
V_F
Maximum DC Reverse Current
(at rated DC blocking voltage)
T_a=25^oC
T_a=125^oC
I_R
Maximum Reverse Recovery Time (Note 1) trr
1.3
5.0
200
150
250
500
Typical Junction Capacitance
(Note 2) C_J
30
Typical Thermal Resistance
(Note 3) R_θ(ja)
Storage and Operation Junction Temperature T_STG,T_J
Note:
16
-50 to +150
1.Reverse recovery condition I_F=0.5A, I_R=1.0A,Irr=0.25A.
2.Measured at 1.0 MHz and applied voltage of 4.0V_dc
3.Thermal resistance from junction to terminal mounted on 5×5mm copper pad area
http://www.sse-diode