RS1A Datasheet, PDF (1/1 Pages) Pan Jit International Inc. – SURFACE MOUNT FAST SWITCHING RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 1.0 Ampere)

SHANGHAI SUNRISE ELECTRONICS CO., LTD.
RS1A THRU RS1M
SURFACE MOUNT FAST
SWITCHING RECTIFIER
VOLTAGE: 50 TO 1000V CURRENT: 1.0A
TECHNICAL
SPECIFICATION
FEATURES
• Ideal for surface mount pick and
place application
• Low profile package
• Built-in strain relief
• High surge capability
• Glass passivated chip
• Fast recovery for high efficiency
• High temperature soldering guaranteed:
260^oC/10sec/at terminal
MECHANICAL DATA
• Terminal: Plated leads solderable per
MIL-STD 202E, method 208C
• Case: Molded with UL-94 Class V-O
recognized flame retardant epoxy
• Polarity: Color band denotes cathode
SMA/DO-214AC
B
A
C
D
F
G
H
A
B
C
D
MAX. .110(2.79) .177(4.50) .058(1.47) .012(0.305)
MIN. .100(2.54) .157(3.99) .052(1.32) .006(0.152)
E
F
G
H
MAX. .208(5.28) .090(2.29) .008(0.203) .060(1.52)
MIN. .194(4.93) .078(1.98) .004(0.102) .030(0.76)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25^oC, unless otherwise stated,for capacitive load,
derate current by 20%)
RATINGS
SYMBOL ^{RS RS RS RS RS RS RS} UNITS
1A 1B 1D 1G 1J 1K 1M
Maximum Repetitive Peak Reverse Voltage
V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
V_DC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
(T_L=110^oC)
I_F(AV)
1.0
A
Peak Forward Surge Current (8.3ms single
I_FSM
30
A
half sine-wave superimposed on rated load)
Maximum Instantaneous Forward Voltage
V_F
1.3
V
(at rated forward current)
Maximum DC Reverse Current
(at rated DC blocking voltage)
Maximum Reverse Recovery Time
T_a=25^oC
T_a=125^oC
I_R
(Note 1) trr
5.0
µA
200
µA
150
250
500
nS
Typical Junction Capacitance
(Note 2) C_J
15
pF
Typical Thermal Resistance
(Note 3) R_θ(ja)
30
o_C/W
Storage and Operation Junction Temperature T_STG,T_J
-50 to +150
o_C
Note:
1.Reverse recovery condition I_F=0.5A, I_R=1.0A,Irr=0.25A.
2.Measured at 1.0 MHz and applied voltage of 4.0V_dc
3.Thermal resistance from junction to terminal mounted on 5×5mm copper pad area
http://www.sse-diode.com