SVR001_15 Datasheet, PDF (3/3 Pages) Solid States Devices, Inc – LOW DROPOUT POSITIVE LINEAR VOLTAGE REGULATOR

SOLID STATE DEVICES, INC.
14830 Valley View Blvd * La Mirada, Ca 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
Electrical Characteristics (Continue)
SVR1086-2.85M, Z, & -20
thru
SVR1086-12M, Z, & -20
t^o SYMBOL MIN TYP MAX UNITS
Thermal Regulation
(30 msec Pulse) 25
--
0.008 0.04 %/W
Ripple Rejection
SVR1086 -_
(ªV=25V, C_ADJ=25:F) *
(f =120Hz, C_OUT =25:F, SVR1086 -2.85
(V_IN = 6V) *
I_OUT = 1.5A)
SVR1086 -3.3
(V_IN = 6.3V) *
SVR1086 -3.6
(V_IN = 6.6V) *
SVR1086 -5
(V_IN = 8V) *
SVR1086 -12
(V_IN = 15V) *
60
75
60
72
60
72
60
72
60
68
54
60
--
dB
--
dB
--
dB
--
dB
--
dB
--
dB
Adjust Pin Current SVR1086 -_
25
I_ADJ
--
55
--
:A
*
--
--
120
:A
Adjust Pin Current
Change
SVR1086 -_
Temperature Stability
Long Term Strability
RMS Output Noice
(1.5V # ªV #15V) *
ªI_ADJ
--
0.2
5.0
:A
*
ªV_OUT
ªT
--
125
ªV_OUT
--
ªVtime
0.5
--
%
0.3
1.0
%
(10Hz # f # 10kHz) 25
e_n
--
0.003
--
%
Thermal Resistance
Junction to Case
(M) & (Z) Packages
-20 Package
Control Circuitry/
Power Transistor
Control Circuitry/
Power Transistor
R_2JC
--
--
--
--
--
1.7 ^oC/W
--
4.0 ^oC/W
--
10
o_C/W
--
15
o_C/W
NOTES:
* Full Temperature Range
1/ For Ordering Information, Price, and Availability Contact Factory.
2/ Screening per MIL-PRF-19500.
3/ For Package Outlines and Lead Bend Options Contact Factory
4/ Devices are guaranteed to withstand transient Input Voltage up to 30V.
For Input Voltages greater then the maximum operating Input Voltage some
degradation of specifications will occur. For 5V and 12V devices operat-
ing at Input/Output differentials greater then 15V, a minimum external
load of 5mA is required to maintain regulation.
5/ See Thermal Regulation specifications for changes in Output Voltage due
to the heating effects. Line and Load Regulations are measured at a con-
stant Junction Temperature by low duty cycle pulse testing. Load Regula-
tion is measured at the Output Lead at approx. 1/8” from the package.
6/ Line and Load Regulation are guaranteed up to the maximum power dis-
sipation of 15W. Power Dissipation is determined by the Input/Output
differential and the Output Current. Guaranteed maximum power dissi-
pation will not be available over the full Input/Output range.
7/ Dropout Voltage is specified over the full Output Current range of the
Device.
8/ Minimum Load Current is defined as the minimum current required to
maintain regulation. At 25V Input/Output differential the device is guar-
anteed to regulate if the Output Current is greater than 10mA.
PIN ASSIGNMENT
PACKAGE Vadj Vin Vout Vout_sen
TO-254 (M) Pin 1 Pin 2 Pin 3 Pin 3
TO-254Z (Z) Pin 1 Pin 2 Pin 3 Pin 3
LCC 20 (-20) Pin 7 2, 17 10, 12 15
FOR PACKAGE OUTLINE REQUEST THE
FOLLOWING DOCUMENTS
PACKAGE
DOCUMENT
TO-254 (M, MUB, MDB)
60-0149-503
TO-254Z (Z, ZUB, ZDB)
60-0149-501
LCC20 (-20)
60-0149-315