Z00007G Datasheet, PDF (1/2 Pages) Solid States Devices, Inc – 5.0 WATT 6.8 – 270 VOLTS ZENER DIODES

Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
DESIGNER’S DATA SHEET
Part Number/Ordering Information
SZ5 ^{__ __ __ __}
│ │ │ └ Screening ^7/
│ │ │ __ = Not Screened
│ │ │ TX = TX Level
│ │ │ TXV = TXV
│ │ │ S = S Level
│ │ └ _{Package Type}
││
__ = Axial Leaded
││
SMS = Surface Mount Square Tab
││
K = 40 Mil Lead Diameter
│
│
│
│
└ _{Voltage Code (See Table II)}
06 thru 90
10 thru 27
└ Tolerance Code (See Table II)
52 & 58 = 10%
51 & 57 = 5%
FEATURES:
■ Hermetically Sealed in Glass
■ Rated at 5 W
■ Available in Axial and Square Tab Surface Mount (SMS) version
■ Available to TX, TXV, and Space Levels ^7/
■ Replacement for Microsemi UZ5706 and UZ5806 Series.
Note:
SSDI’s Zeners offer standard Voltage
Tolerance of ±10% and ±5%. For other Voltages and Voltage Tolerances,
contact SSDI’s Marketing Department.
SZ5706 thru SZ5890
And
SZ5110 thru SZ5227
5.0 WATT
6.8 – 270 VOLTS
ZENER DIODES
DIM
A
B
C (__)
C (K)
D
AXIAL(K & ___)
MIN.
---
---
.047”
.038”
1.00”
MAX
.158”
.185”
.053”
.042”
---
Maximum Ratings (Table I)
Nominal Zener Voltage
Maximum Zener Current
Forward Surge Current
(8.3 msec Puls)
Continuous Power
Operating and Storage Temp.
Thermal Resistance,
Junction to Lead
L=3/8” (Axial)
Thermal Resistance,
Junction to End Cap
(SMS)
__ - axial
K - axial
Symbol Value Units
V_Z 6.8 - 270 V
I_ZM 16 - 675 mA
I_FSM
.30 - 40
A
P_D
5.0
W
Top
&Tstg
-65 to +175
ºC
R_θJL
34
45
ºC/W
R_θJE
7
ºC/W
DIM
MIN.
A
.155”
B
.190”
C
.020”
D Body to Tab Clearance: .001”
MAX.
.185”
.225”
.030”
SQUARE TAB (SMS)
All dimensions are prior to
soldering
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: Z00007G
DOC