SVR137Z Datasheet, PDF (1/3 Pages) Solid States Devices, Inc – 1.5 AMP Negative Adjustable Linear Voltage Regulator 40 Volts

Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
Designer’s Data Sheet
Part Number / Ordering Information ^1/
SVR137 __ __ __
│ │ └ Screening ^2/
││
__ = Not Screened
││
TX = TX Level
││
TXV = TXV
││
S = S Level
│ └ ^{Lead Bend}
│
__ = Straight
│
│
└
DB = Down Bend
UB = Up Bend
Package
M = TO-254
Z = TO-254Z
J = TO-257
G = CerPack
S.5= SMD.5
MAXIMUM RATINGS
Power Dissipation ^3/
Input to Output Voltage Differential
Maximum Current Load
Operating Junction Temperature
Storage Temperature
TO-254(M)
TO-254Z(Z)
SVR137 Series
1.5 AMP
Negative Adjustable
Linear Voltage Regulator
40 Volts
Features:
 Guaranteed 0.02% line regulation
 Guaranteed 0.5% load regulation
 Min 1.5A output current
 Eutectic die attach
 Superior to LM137 types
 Complimentary use with LM117 types
 Isolated hermetically sealed power package (M,Z,J)
 150°C operating temperature
 Custom lead forming available (M,Z,J)
 TX, TXV, and Space Level Screening Available
TO-257(J)
Symbol
P_D
ΔV_IN/OUT
I_FSM
T_J
T_STG
CerPack (G)
Value
Internally
Limited, 20
40
100
-55 to +150
-65 to +150
Units
W
V
Amps
ºC
ºC
SMD.5 (S.5)
Notes:
1/ For ordering information, price, operating curves, and availability, contact factory.
2/ Screening based on MIL-PRF-19500. Screening flows available on request.
3/ Unless otherwise specified, these specifications apply: ΔV = 5V and I_OUT = 0.5A. Power dissipation is internally limited. However, these
specifications apply for power dissipation up to 20W, I_MAX = 1.5A.
4/ Testing is done using a pulsed low duty cycle technique.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: LA0011B
DOC