SUM60UF_1 Datasheet, PDF (1/2 Pages) Solid States Devices, Inc – ULTRA FAST RECOVERY RECTIFIER

Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
SUM60UF thru SUM90UF
and
SUM60UFSMS thru SUM90UFSMS
Designer’s Data Sheet
Part Number/Ordering Information ^1/
SUM __ __ __
│ │ └ Screening ^2/
││
__ = Not Screened
││
TX = TX Level
││
TXV = TXV Level
││
S = S Level
││
│ └ ^{Package Type}
│ ^{__ = Axial Leaded}
│ SMS = Surface Mount Square Tab
└
Voltage/Family
60UF = 6,000V
70UF = 7,000V
80UF = 8,000V
90UF = 9,000V
MAXIMUM RATINGS ^{3/ 6/}
RATING
400 mA
ULTRA FAST RECOVERY RECTIFIER
6,000 thru 9,000 VOLTS
70 nsec
FEATURES:
• PIV to 9,000 Volts
• Hermetically sealed axial and square tab
surface mount package
• Ultra fast recovery 70 nsec maximum ^4/
• Void free construction
• Metallurgically bonded
• 175°C maximum operating temperature
• TX, TXV, and S-level screening available^2/
• Also available in fast versions, consult factory
SYMBOL VALUE UNIT
Peak Inverse Voltage
SUM60UF and SUM60UFSMS
SUM70UF and SUM70UFSMS
SUM80UF and SUM80UFSMS
PIV
SUM90UF and SUM90UFSMS
6000
7000
8000
9000
Volts
Average Rectified Current
Surge Current (1 Cycle)
Operating & Storage Temperature ^5/
TA = 25°C
TA = 100°C
I_O1
I_O2
I_FSM
T_J and
T_STG
400
250
25
-65 to +175
mA
Amps
°C
NOTES:
1/ For ordering information, price, operating curves, and availability- contact factory.
2/ Screening based on MIL-PRF-19500. Screening flows available on request.
3/ Unless otherwise specified, all electrical characteristics @25ºC.
4/ IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C
5/ Maximum lead/end temperature for soldering is 250°C, 3/8” from case for 5 sec. maximum.
6/ Operating and testing over 10,000 V/inch may require encapsulation or immersion in
suitable dielectric material.
Axial Leaded
SMS
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RC0039E
DOC