SPD1510HF Datasheet, PDF (1/2 Pages) Solid States Devices, Inc – 15 AMP HYPERFAST RECOVERY RECTIFIER 100 - 200 VOLTS, 30 nsec

SPD1510HF thru
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
Designer’s Data Sheet
Part Number/Ordering Information ^1/
SPD15 __ HF __ __
│
│ └ Screening ^2/
│
│
__ = Not Screened
│
│
TX = TX Level
│
│
TXV = TXV
│
│
S = S Level
│
│
│
└ ^{Package Type}
│
SMS = Surface Mount Square Tab
│
GW = Gullwing
│
BT = Button Tab
│
└
Voltage/Family
10 = 100V
15 = 150V
20 = 200V
SPD1520HF Series
15 AMP
HYPERFAST RECOVERY
RECTIFIER
100 ─ 200 VOLTS, 30 nsec
FEATURES:
 Hyper fast reverse recovery: 30 nsec maximum^4/
 High surge current: 450 A maximum
 Low forward voltage drop .95 V @15 A
 Hermetically sealed, void free construction
 High temperature category I eutectic metallurgical
bond
 Depending on board configuration, two SPD1520HF
devices can match the current output of larger and
heavier DO-4 and TO-25X packages
 Weight: SMS – 0.45 g (typ), GW – 0.35 g (typ),
BT – 0.3 g (typ)
 Surface mount components eliminate mounting
hardware required for DO-4 and TO-25X packages
 Available in surface mount square tab, gullwing,
and button tab versions
 Excellent thermal shock performance
 High temperature operation at junction and case
temperature of 175°C
 TX, TXV, and S-level screening available^2/
MAXIMUM RATINGS ^3/
RATING
Peak Repetitive Reverse Voltage
and DC Blocking Voltage
SPD1510HF
SPD1515HF
SPD1520HF
Average Rectified Forward Current
(SMS T_EC ≤ 100°C) ^5/
Peak Surge Current
(8.3 ms pulse, half sine wave, superimposed on Io, V_RWM = rated,
allow junction to reach equilibrium between pulses, T_A= 25°C)
Operating & Storage Temperature
Thermal Resistance
Surface Mount Square Tab (SMS)
Gullwing (GW)
Button Tab (BT)
SYMBOL
V_RRM
V_RWM
V_R
I_O
I_FSM
T_J and T_STG
R_θJE
R_θJL
R_θJC
VALUE
100
150
200
15
450
-65 to +175
3.5
4.5
2.0
UNIT
Volts
Amps
Amps
°C
°C/W
NOTES:
1/ For ordering information, price, operating curves, and availability- contact factory.
2/ Screening based on MIL-PRF-19500. Screening flows available on request.
3/ Unless otherwise specified, all electrical characteristics @ 25°C.
4/ I_F = 1A, I_R = 1A, I_RR = 0.1A, T_A = 25°C
5/ Operating at higher I_O currents may be achieved based on specific application and
device mounting if T_J is maintained below 175°C.
Surface Mount
Square Tab (SMS)
Gullwing
(GW)
Button Tab
(BT)
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RC0173A
DOC