SDAD102UF_1 Datasheet, PDF (1/1 Pages) Solid States Devices, Inc – ULTRA FAST RECOVERY STACKABLE HIGH VOLTAGE RECTIFIER

Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
Designer’s Data Sheet
Part Number/Ordering Information ^1/
SDAD10 2 __ __ __ __
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│ ^{└ Screening 2/}
│
__ = Not Screened
│
TX = TX Level
│
TXV = TXV Level
│
S = S Level
└ Reverse Recovery Time
│
UF = Ultra Fast Recovery Time
└ Voltage 2.5 = 2.5kV, 5 = 5kV,
│
7.5 = 7.5kV, 10 = 10kV, and 15 =
└ ^15kV
Power Rating (See Below)
└ Package Size = 2 Inches Diameter
SDAD102 UF Series
2,500 to 15,000 VOLTS
ULTRA FAST RECOVERY
STACKABLE HIGH VOLTAGE RECTIFIER
FEATURES:
 Stackable to 600 kV+
 PIV 2.5kV to 15kV
 High Current Ratings
 Ultra Fast Reverse Recovery Time
 Only Hermetically Sealed Rectifiers Used
 Controlled Avalanche Rated
 Modular Design for Easy Stacking
 Storage and Operating Temps -65^°C to +150^°C
 Available in Standard, Fast and Hyper Fast
Versions
 TX, TXV, and S-Level Screening Available ^2/
ELECTRICAL CHARACTERISTICS ^3/
Part Number
Peak
Inverse
Voltage
PIV (KV)
Reverse
Recovery
Time 5/
Max (ns)
SDAD102 H 2.5 UF
SDAD102 H 5.0 UF
SDAD102 H 7.5 UF
SDAD102 H 10 UF
SDAD102 H 15 UF
25 C
2.5
5.0
7.5
10
15
25 C
70
70
70
70
70
Average DC Output Current 4/
Surge
Tc = Case Temperature
Non-repetitive
If(avg)
75 C
9.00
6.60
2.00
1.50
1.00
50 C
10.6
8.80
3.00
2.00
1.40
60 C
10.0
8.00
2.50
1.80
1.20
Ifsm
100 C
200
200
125
100
100
Maximum Forward
Voltage Drop
Vf (V) If (A)
25 C
4.35 6.3
7.92 4.5
10.9 1.5
13.6 1.2
18.9 0.7
Maximum
Leakage Current
@PIV
Ir (uA)
25 C
30
30
15
15
15
SDAD102 Package:
NOTES:
1/ For Ordering Information, Price, Curves, and Availability- Contact
Factory.
2/ Screening based on MIL-PRF-19500. Screening flows available on
request.
3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC.
4/ Tc = 50 ºC typical operation in oil.
Tc = 75 ºC is typical ambient Ta = 25 ºC unheatsunk.
Tc = 60 ºC typical operation with extender plates in air.
5/ Recovery Conditions: I_F = 0.5 Amp, I_R = 1.0 Amp rec. to .25 Amp.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RA0087B
DOC