SDAD102UF Datasheet, PDF (1/1 Pages) Solid States Devices, Inc – 2,500 to 15,000 VOLTS ULTRA FAST RECOVERY STACKABLE HIGH VOLTAGE RECTIFIER

SDAD102 UF Series
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
Designer’s Data Sheet
Part Number/Ordering Information ^1/
SDAD10 2 __ __ __ __
¦ ¦ ¦ _¦ + Screening ^2/
¦_¦ ¦ _¦
__ = Not Screened
¦
¦
¦
¦^¦
¦
¦
¦
¦
¦
¦
TX = TX Level
TXV = TXV
S = S Level
¦ ^¦ ¦ _{+ Reverse Recovery Time}
¦¦ ¦
UF = Ultra Fast Recovery Time
¦ _¦ + _{Voltage 2.5 = 2.5kV, 5 = 5kV,}
¦
¦
¦
7.5 = 7.5kV, 10 = 10kV, and 15 = 15kV
¦ ⁺ Power Rating (See Below)
¦
+ ^{Package Size = 2 Inches Diameter}
2,500 to 15,000 VOLTS
ULTRA FAST RECOVERY
STACKABLE HIGH VOLTAGE RECTIFIER
FEATURES:
• Stackable to 160kV
• PIV 2.5kV to 15kV
• High Current Ratings
• Ultra Fast Reverse Recovery Time
• Only Hermetically Sealed Rectifiers Used
• Controlled Avalanche Rated
• Modular Design for Easy Stacking
• Storage and Operating Temps -65^°C to +150^°C
• Available in Standard, Fast and Hyper Fast
Versions
• TX, TXV, and S-Level Screening Available ^2/
ELECTRICAL CHARACTERISTICS ^3/
Part Number
Peak Inverse
Voltage
Reverse
Recovery
Time 5/
PIV (KV) Max (ns)
25 °C
25 °C
SDAD102 H 2.5 UF
2.5
70
SDAD102 H 5.0 UF
5.0
70
SDAD102 H 7.5 UF
7.5
70
SDAD102 H 10 UF
10
70
SDAD102 H 15 UF
15
70
Average DC Output Current 4/
Surge
Maximum Forward
Tc = Case Temperature
Non-repetitive
Voltage Drop
75 °C
9.00
6.60
2.00
1.50
1.00
If(avg)
50 °C
10.6
8.80
3.00
2.00
1.40
60 °C
10.0
8.00
2.50
1.80
1.20
Ifsm
100 °C
200
200
125
100
100
Vf (V) If (A)
25 °C
4.35
6.3
7.92
4.5
10.9
1.5
13.6
1.2
18.9
0.7
Maximum Leakage
Current @PIV
Ir (uA)
25 °C
30
30
15
15
15
SDAD102 Package:
NOTES:
1/ For Ordering Information, Price, Curves, and Availability- Contact Factory.
2/ Screened to MIL-PRF-19500.
3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC.
4/ Tc = 50 ºC typical operation in oil.
Tc = 75 ºC is typical ambient Ta = 25 ºC unheatsunk.
Tc = 60 ºC typical operation with extender plates in air.
5/ Recovery Conditions: I_F = 0.5 Amp, I_R = 1.0 Amp rec. to .25 Amp.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RA0087A
DOC