SDAD101M2.5HF Datasheet, PDF (1/1 Pages) Solid States Devices, Inc – Hyper Fast Recovery STACKABLE HIGH VOLTAGE RECTIFIER

Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, CA 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
Designer’s Data Sheet
Part Number/Ordering Information ^1/
SDAD10 1 __ __ __ __
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│ ^{└ Screening 2/}
│
__ = Not Screened
│
TX = TX Level
│
TXV = TXV Level
│
S = S Level
└ Reverse Recovery Time
│
UF = Ultra Fast Recovery Time
└ Voltage 2.5 = 2.5kV, 5 = 5kV,
│^│
7.5 = 7.5kV, 10 = 10kV, and
││
13 = 13kV
│
│
└ _{Current Rating = M (see below)}
└ _{Package Size = 1 Inch Diameter}
SDAD101M2.5HF thru
SDAD101M13HF
30 nsec
2,500 to 13,000 Volts
Hyper Fast Recovery
STACKABLE HIGH VOLTAGE RECTIFIER
FEATURES:
 Stackable to 600 kV+
 PIV: 2.5 kV to 13 kV
 Hyper Fast Reverse Recovery Time: 30 nsec
 Hermetically Sealed Internal Discretes
 Controlled Avalanche Rated
 Modular Design for Easy Stacking
 Storage and Operating Temps -65°C to +150°C
 Available in Standard, Fast and Ultra Fast
Versions
 TX, TXV, and S-Level Screening Available ^2/
ELECTRICAL CHARACTERISTICS ^3/
Part Number
Peak Reverse
Inverse Recovery
Voltage Time 5/
PIV (KV) Max (ns)
Average DC
Output Current
Tc = Case
Temperature 4/
If(avg)
Surge
Non-
repetitive
Ifsm
25ºC 25ºC 75ºC 50ºC 100ºC
SDAD101M2.5HF
SDAD101M5.0HF
SDAD101M7.5HF
SDAD101M10HF
SDAD101M13HF
2.5
30 0.80 1.00 25
5.0
30 0.80 1.00 25
7.5
30 0.80 1.00 25
10
30 0.72 0.90 25
13
30 0.56 0.70 25
Maximum Forward
Voltage Drop
Vf (V)
If (A)
25ºC
8.0 1.00
14.0 1.00
20.0 1.00
26.0 0.90
34.0 0.70
Maximum Leakage
Current @PIV
Ir (uA)
25ºC 100ºC
20 250
20 250
20 250
20 250
20 250
SDAD101 Package:
NOTES:
1/ For Ordering Information, Price, Curves, and Availability-
Contact Factory.
2/ Screening based on MIL-PRF-19500. Screening flows available
on request.
3/ Unless Otherwise Specified, All Electrical Characteristics
@25ºC.
4/ Tc = 50 ºC typical operation in oil.
Tc = 75 ºC is typical ambient Ta = 25 ºC.
5/ Recovery Conditions: I_F = 0.5 Amp, I_R = 1.0 Amp rec. to .25
Amp.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RA0102B
DOC